Djippe groefkogellagers - 6000-searje
Modelnûmer
Djippe groefkogellagers->6000-searje
| lager Modelnûmer | diafragma | Bûtenste diameter | breedte | Rated lading (KN) | Balparameter | Snelheid beheine | Referinsjegewicht kilogram | |||||||
| d | D | B | Dynamyske lading | Statyske lading | kwantiteit | diminsje | fet | oalje | ||||||
| millimeter-inch | millimeter-inch | millimeter-inch | Cr | Kor | millimeter | Revolúsjes per minuut | Revolúsjes per minuut | |||||||
| 6000 | 10 | 0.3937 | 26 | 1.0236 | 8 | 0.315 | 4.55 | 1.95 | 7 | 4.763 | 29000 | 34000 | 0.019 | |
| 6001 | 12 | 0.4724 | 28 | 1.1024 | 8 | 0.315 | 5.10 | 2.39 | 8 | 4.763 | 26000 | 30000 | 0.022 | |
| 6002 | 15 | 0.5906 | 32 | 1.2598 | 9 | 0.3543 | 5.60 | 2.84 | 9 | 4.763 | 22000 | 26000 | 0.030 | |
| 6003 | 17 | 0.6693 | 35 | 1.378 | 10 | 0.3937 | 6.80 | 3.35 | 10 | 4.763 | 20000 | 24000 | 0.039 | |
| 6004 | 20 | 0.7874 | 42 | 1.6535 | 12 | 0.4724 | 9.40 | 5.05 | 9 | 6.350 | 18000 | 21000 | 0.069 | |
| 6005 | 25 | 0.9843 | 47 | 1.8504 | 12 | 0.4724 | 10.10 | 5.85 | 10 | 6.350 | 15000 | 18000 | 0.080 | |
| 6006 | 30 | 1.1811 | 55 | 2.1645 | 13 | 0.5118 | 13.20 | 8.30 | 11 | 7.144 | 13000 | 15000 | 0.120 | |
| 6007 | 35 | 1.3779 | 62 | 2.4409 | 14 | 0.5512 | 16.00 | 10.30 | 11 | 7.938 | 12000 | 14000 | 0.160 | |
| 6008 | 40 | 1.5748 | 68 | 2.6772 | 15 | 0.5906 | 16.80 | 11.50 | 12 | 7.938 | 10000 | 12000 | 0.190 | |
| 6009 | 45 | 1.7716 | 75 | 2.9528 | 16 | 0.6299 | 21.00 | 15.10 | 12 | 8.731 | 9200 | 11000 | 0.250 | |
| 6010 | 50 | 1.965 | 80 | 3.1496 | 16 | 0.6299 | 21.80 | 16.60 | 13 | 8.731 | 8400 | 9800 | 0.260 | |
| 6011 | 55 | 2.1653 | 90 | 3.5433 | 18 | 0.7087 | 28.30 | 21.20 | 12 | 11.000 | 7700 | 9000 | 0.390 | |
| 6012 | 60 | 2362 | 95 | 3.74 | 18 | 0.7087 | 29.50 | 23.20 | 13 | 11.000 | 7000 | 8300 | 0.420 | |
| 6013 | 65 | 2559 | 100 | 3.937 | 18 | 0.7087 | 30.50 | 25.20 | 13 | 11.112 | 6500 | 7700 | 0.440 | |
| 6014 | 70 | 2.7559 | 110 | 4.3307 | 20 | 0.7874 | 38.00 | 31.00 | 13 | 12.303 | 6100 | 7100 | 0.600 | |
| 6015 | 75 | 2.9528 | 115 | 4.5276 | 20 | 0.7874 | 39.50 | 33.50 | 14 | 12.303 | 5700 | 6700 | 0.640 | |
| 6016 | 80 | 3.1496 | 125 | 4.9213 | 22 | 0.8661 | 47.50 | 40.00 | 14 | 13.494 | 5300 | 6200 | 0.850 | |
| 6017 | 85 | 3.3465 | 130 | 5.1181 | 22 | 0.8661 | 49.50 | 43.00 | 14 | 14.000 | 5000 | 5900 | 0.890 | |
| 6018 | 90 | 3.5433 | 140 | 5.5118 | 24 | 0.9449 | 58.00 | 49.50 | 14 | 15.081 | 4700 | 5600 | 1.150 | |
| 6019 | 95 | 3.7402 | 145 | 5.7087 | 24 | 0.9449 | 60.50 | 54.00 | 14 | 15.081 | 4500 | 5300 | 1.200 | |
| 6020 | 100 | 3.937 | 150 | 5.9055 | 24 | 0.9449 | 60.00 | 54.00 | 14 | 16.000 | 4200 | 5000 | 1.250 | |
Wêrom ús kieze?
materiaal
Wy brûke meastallagerstaal (GCr15), mar in protte fabrikanten brûke allinich sêftere koalstofstielmaterialen, sadat ús lagers in hegere hurdens en in langere libbensdoer hawwe.
Waarmtebehanneling
Wy hawwe ús eigen waarmtebehannelingsynstallaasje enhoege net útbestege te wurdenWy brûke in legere snelheid en mearstabile temperatuerom it stiel effektyf te kontrolearjen en de taaiheid en libbensduur fan it stiel te fergrutsjen.
Oare lytsskalige lagerbedriuwen moatte meastentiids útbesteegje. In protte útbestegingsfabriken fersterkje allinich de hurdens fan it lageroerflak fanwegen kostenfaktoaren, mar de hurdens binnen is net genôch, wat de reden is wêrom't in protte minne lagers maklik te barsten binne.
Krektens
Us lagerskin wurde kontroleare mei in hichtenauwkeurigens fan 0 ~ -0.004 mm, hege snelheid en glêdens.
Meardere slypprosessen
Wy slypje it lager in protte kearen, mar oaren slypje it miskien mar ien kear, sadat de ôfskuoring fanús lager is tige glêd.
Ta beslút
Wy brûke materialen fan hege kwaliteit en meardere slypprosessen, sadat ús lagers de skaaimerken hawwe fanhege snelheid, leech lûd, hege presyzje en lange libbensdoer.
